Please allow 48 hours before removing paper, Replacing sealant and using your bath. If your shower screen has been removed allow 7 days before replacing, Note that certain manufacture characteristics in the original bath surface such as a degree of surface contour and minuscule black specks (Pinholes) may still be evident in certain baths, these are in the original cast and no way detrimental to the use or the service life of your resurfaced bath,

It is possible that a gritty feeling may be present during the first few uses of your bath this is due to air born dust particles settling on the surface during the final curing process .Do not attempt to pick at any dust particles as they will dissipate with use

In order to prolong the longevity of your resurfaced bath, Bath Resurfacing Company recommends you follow these simple instructions.

• Use a non abrasive liquid cleaner paying particular attention to the manufacturers instructions

• Should your bath be damaged either chipped, scratched or grazed notify Bath Resurfacing Company immediately. In most cases we are able to perform a local repair preventing the damage from spreading. The longer you wait the higher the cost could be.

• If your taps or shower drip have them repaired as soon as possible prolonged dripping will cause staining and will eventually ruin the surface.

• Where applicable ensure taps, waist, over-flow, shower screens ect are fitted correctly not over tightened or rubbing on the bath surface.

• Do not use strongly coloured bath additives or hair dye as these may stain the surface always follow manufacturers instructions. In hard water areas thoroughly dry bath after use to avoid lime scale build up.

• If you have excessively hot water e.g. Above 60°c run approximately six inches of cold water before adding the hot water

• Refrain from using metal /hard plastic objects Toys, Soap trays, Heavy solid plugs etc

• Do not use suction cup products e.g. non-slip mats or sink plunger. Where necessary Bath Resurfacing Company recommends the use of self-adhesive non-slip pads.

• Do not bath pets

If any damage arising, or failure in any way of the said work carried out is caused as a result of failure to comply with any of the above instructions, then Bath Resurfacing Company shall not be held liable under this guarantee or otherwise for any damage or failure thereafter.

Our terms are payment on completion we accept either cash or cheque.